The Motion Sensor Mode & Dusk to Dawn Sensor 2 in 1 AmeriTop Secure Lights Outdoor with the three heads design, output 35W, 3500 Lumens, 6000K high brightness output and good heat dissipation.

ETL Certification Intertek 5002654 for outstanding quality standards provide efficient lighting and adds extra safety for your house.

There are 2 Modes Available:
Motion Sensor- AUTO Mode
Photocell Light Sensor - Dusk to Dawn Mode

AUTO MODE (Motion Sensor)

Set-up: Move to the AUTO, 1min/5min/10min Position

Function: Only work at night. Auto ON for pre-determined time(1min/5min/10min) when people or other living objects are detected within the sensing area, and Auto OFF after no further motion is detected.

TEST: To test the light before using it for the first time or after maintenance. Auto ON when motion is detected and auto-off after lighting up for 6 seconds.

1. TIME: allows the choice of timed activation.

TEST: this selection allows the light to be activated with the motion for up to 6 seconds regardless of ambient light.
1MIN: the light activates for one minute at night.
5MIN: the light activates for five minutes at night.
10MIN: the light activates for ten minutes at night.

2. SENS (sensitivity): allows you to decide on the distance of detection.

H- High sensitivity up to 60 feet.
M- Medium sensitivity up to 36 feet.
L- Low distance sensitivity up to 23 feet.

DUSK TO DAWN MODE:

Set-up: Move to the DUSK TO DAWN Position

Function: At dusk, the light will turn on at 50% brightness as an accent light. When motion is detected the light illuminates at 100% brightness. The light will operate like this until dawn or as ambient light increases.

3H/6H MODE

Set-up: Move to the 3H/6H Position

Function: At dusk, the light will turn on at 50% brightness as an accent light. When motion is detected the light illuminates at 100% brightness. The light will operate like this for 6 hours. After 6 hours the light becomes just a motion light and the accent light feature turns off.

NOTE:

Make sure there is no other infrared or ambient light around, under, or point to the motion sensor light.

Package Includes:
1x LED Motion Sensor Light
1x Crossbar
2x Machine screws
1x Ring
1x Nut
3x Wire Nuts